| No. | Brand | J | R | F | P | C | d | 1 | T |
| 192.32.3550.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.50.3550.990.41.1502 | Standard 5 | - | - | - | - | 85 mm | 140 mm | - | - |
| 191.32.2240.990.41.1502 | Standard 5 | - | - | - | - | 88 mm | 160 mm | - | - |
| 1 0235 | Rollix | - | - | - | - | - | 51,054 mm | - | - |
| 121.40.4750.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.40.2240.891.41.1503 | Standard 5 | - | - | - | - | 16 mm | 30 mm | - | - |
| 121.32.4250.990.41.1502 | Standard 5 | - | - | - | - | 60 mm | 280 mm | - | - |
| 29 0411 01 | Rollix | - | - | - | - | - | 80 mm | - | - |
| 92.35.1900.990.11.1502 | Standard 5 | - | - | - | - | - | 3.4375 in | - | - |
| 91.35.1900.991.41.1502 | Standard 5 | - | - | - | - | 236 mm | 710 mm | - | - |
| 192.50.4500.990.41.1502 | Standard 5 | - | - | - | - | 7,92 mm | - | - | - |
| 11.25.1800.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.35.2012.990.11.1502 | Standard 5 | - | - | - | - | 4 mm | 5 mm | - | - |
| 12.40.2950.001.41.1502 | Standard 5 | - | - | - | - | 33 mm | 190 mm | - | - |
| 26 0411 01 | Rollix | - | - | - | - | 40 mm | 130 mm | - | - |
| 11.40.2240.001.41.1502 | Standard 5 | - | - | - | - | 15,748 mm | 45,242 mm | - | 19,558 mm |
| 121.40.5300.990.41.1502 | Standard 5 | - | - | - | - | - | 25.0000 mm | - | - |
| 121.36.4500.990.41.1502 | Standard 5 | - | - | - | - | 100,000 mm | 480,000 mm | - | - |
| 191.50.5000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.30.1607.991.21.1502 | Standard 5 | - | - | - | - | 33 mm | 400 mm | - | - |
| 91.40.2199.990.11.1502 | Standard 5 | - | 2 mm | - | - | - | 65 mm | - | 32,75 mm |
| 11.30.2235.001.41.1503 | Standard 5 | 3,5 mm | - | - | - | - | 44,45 mm | - | - |
| 11.50.3167.001.49.1502 | Standard 5 | - | - | - | - | - | 65,000 mm | - | - |
| 91.50.2266.990.41.1502 | Standard 5 | - | - | - | - | 30 mm | - | - | - |
| 161.45.2654.890.11.1503 Standard 5 Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:10.9 mm; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):104; C0 - Static Radial Rating:1560000 N; DD:342.9 mm; db - Cone Backface Backing Diameter:281 mm; Cg - Geometry Factor:0.14; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:128000 lbf; Design Units:METRIC; Aa - Cage-Cone Backface Clearance:6.9 mm; da - Cone Frontface Backing Diameter:245 mm; |
| 11.35.1750.700.11.1503 Standard 5 Slewing Ring Bearings | Bearing Type:straight; OD Chamfer Length (Co):1.200; Shaft Size (ds) - 32 -0.025 / -0.05:32 0.025 / 0.05; Bearing number:AST11 3230; Outer Diameter (mm):36; Material:Bronze shell with PT; Wall Thickness (S3):2.005; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; ID Chamfer Angle (B deg.):30; Bearing Bore after Mounting (di):32.085 / 31.99; Bore Diameter (mm):32; Shaft Dia., Nominal (d):32.0000; |
| 162.45.2510.891.41.1503 Standard 5 Slewing Ring Bearings | d:1.6250 in; Manufacturing Plant Location:Rogersville, TN; Housing Material:Cast Iron; Bearing Insert Material:Steel; Ball Grade:Class 10; Anti-Rotation Pin:Yes; Ball Bearing Housing Series:209 Series; Ring Size:Standard; UPC:782475117574; Flinger Material:Steel; Flinger Type:Rubberized; Bearing Series:209 Series; Max Bearing Speed:5000 rpm; Retainer Type:Std Retainer; Housing Type:Wide Slot Take-Up; |
| 11.35.1750.701.41.1503 Standard 5 Slewing Ring Bearings | Thread G:M85x2; D3:110 mm; L:63.00 mm; Appropriate Hydraulic Nut:HMV17; C:18 mm; Locknut:KM17; Lockwasher and Lockplates:MB17; Weight:1.18 Kg; d1:75.00 mm; |
| 3 026 Rollix Slewing Ring Bearings | Bearing number:W 63805-2RZ; Limiting speed:19000 r/min; Calculation factor kr:0.02; Outer Diameter (mm):25; Mass bearing:0.03 kg; r1,2 min.:0.3 mm; D2 ≈:34.12 mm; Calculation factor - kr:0.02; Basic dynamic load rating C:3.38 kN; Calculation factor - f0:13.7; ra max.:0.3 mm; D:37 mm; Width (mm):10; d1 ≈:28.2 mm; Calculation factor f0:13.7; Size (mm):37x25x10; Basic static load rating - C0:2.5 kN; |
| 161.45.2366.891.41.1503 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):30; Characteristic rolling element frequency, BSF:9.7 Hz; Da max:28 mm; Mass:0.04 kg; Da max.:28 mm; Nlim (oil):18,000 rpm; Lw:16.8 mm; Cr:18 kN; ras max:0.3 mm; Fw:22 mm; Manufacturer Name:NTN; Lubrication hole on outer ring:Oui/Yes; Min operating temperature, Tmin:-20 °C; Basic static load rating (C0):27 kN; r min.:0,3 mm; Characteristic outer ring frequency, BPF0:8.08 Hz; Characteristic inner ring frequency, BPFI:9.92 Hz; |
| 12.35.2500.000.11.1503 Standard 5 Slewing Ring Bearings | Self Aligning:Yes; d:1.7500 in; Manufacturing Plant Location:Crossville, TN - DC; UPC:782475887163; Seal Type:Single Lip; Ball Material:Steel; Ring Size:Standard; Retainer Type:Std Retainer; Grease Type:Unirex N2; Housing Type:2 Bolt Flange; Max Bearing Speed:8000 rpm; Bearing Duty:Normal Duty; Bearing Outer Ring Material:Steel; Retainer Material:Nylon; Bearing Insert Material:Steel; Flinger Type:Rubberized; |
| 121.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Db(min):-; d:95 mm; Width (mm):43; Grease lub.:3300; Outer Diameter (mm):170; ra(max):2; C0r:298; Size (mm):95x170x43; B:43 mm; d1:-; Oil lub.:4400; Bearing No.:NJ2219; da(min):-; B2:-; (Refer.)Mass(kg):3.98; r min.:2.1 mm; Bearing number:NJ2219; Bore Diameter (mm):95; Cu:42.9; db(max):111; |
| 11.30.2031.600.11.1503 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):406,400; Minimum Buy Quantity:N/A; Size (mm):406.400x444.500x19.0; C:19,050 mm; Bearing number:KXF160; Width (mm):19,050; B:19,050 mm; Outer Diameter (mm):444,500; d:406,400 mm; Manufacturer Name:NTN; Category:Ball Bearings; Inventory:0.0; Product Group:B00308; D:444,500 mm; |
| 191.40.2800.990.41.1502 Standard 5 Slewing Ring Bearings | Weight:1 Kg; C:24 mm; Bore Diameter (mm):90; Size (mm):90x140x24; Angle (α):15 °; Width (mm):24; Outer Diameter (mm):140; d:90 mm; B:24 mm; D:140 mm; Bearing number:5S-7018UCG/GNP42; |
| 192.25.2800.990.41.1502 Standard 5 Slewing Ring Bearings | D:26 mm; (Grease) Lubrication Speed:6000 r/min; Width (mm):25; Outer Diameter (mm):26; Bore Diameter (mm):20; Size (mm):20x26x25; Basic dynamic load rating (C):9,1 kN; Basic static load rating (C0):14,8 kN; d:20 mm; Weight:0,028 Kg; C:25 mm; Bearing number:HK2025; |
| 11.50.3347.001.49.1502 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):10; C:8 mm; Outer Diameter (mm):26; d:10 mm; Size (mm):10x26x8; D:26 mm; Weight:0,019 Kg; Bearing number:6000-2RS; Width (mm):8; B:8 mm; |
| 3 0402 Rollix Slewing Ring Bearings | B:20 mm; d:40 mm; Bearing number:N40000S04H100; Width (mm):20; Size (mm):40x85x20; Bore Diameter (mm):40; D:85 mm; Outer Diameter (mm):85; |
| 161.36.1800.891.41.1503 Standard 5 Slewing Ring Bearings | L:50 mm; B:40 mm; A:7 mm; S2:5,2 mm; C:40 mm; d:20 mm; G:35 mm; F:42 mm; K:7 mm; T:11 mm; W:54 mm; Thread (G1):M6; Bearing number:SC 20-UU; h:21 mm; Bore Diameter (mm):20; |
| 1 0422 01 Rollix Slewing Ring Bearings | Width (mm):20; a:32,7 mm; (Grease) Lubrication Speed:11 000 r/min; Basic static load rating (C0):22,5 kN; Angle (α):20 °; D:145 mm; Outer Diameter (mm):145; Basic dynamic load rating (C):24,3 kN; d:105 mm; r min.:1,1 mm; Size (mm):105x145x20; Bore Diameter (mm):105; C:20 mm; Bearing number:3NCHAR921CA; Weight:0,816 Kg; r1 min.:0,6 mm; B:20 mm; |
| 192.25.2240.990.41.1502 Standard 5 Slewing Ring Bearings | Bearing Type:Split Cylindrical Re; Dimension H:140 mm; Series Type:Light Series; Seal Type:High Temperature Pac; Maximum Speed:1970 rpm; Bearing UPC:013992026682; Cr - Dynamic Load Rating:71040 lbf; Cor - Static Load Rating:95993 lbf; Bolt Size:2 x M24; Housing Width:5.5 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension J:350 mm; Dimension H2:300 mm; Dimension L:410 mm; Dimension M:120 mm; |
1 0181 02 Rollix Slewing Ring Bearings Video
Installation of Magnetic Pickups - FW Murphy
00-02-0181 rev. 2019/12/20 ... MP7905 and MP7906: Type 6061 Aluminum/Anodize Class 1 ... TEF insulated per MIL-W-16878D Type E, 1 White and 1 Black.2 pages
Damage Disclosure Statement
MVR-181. (Rev. 02/2022). DAMAGE DISCLOSURE STATEMENT. Questions 1 & 4 apply only to five (5) model years old and newer. Alterations or erasures void this ...1 page
Application for Tax Clearance Certificate (REV-181) - PA ...
1. (Please submit copy of 501(c) exemption letter) ... REV-181 (CM) 02-21 ... of Revenue (address on Page 1) and one copy to the PA dePARTMenT OF LABOR &.4 pages
words underlined are additions. hb0181-02-c2 Page 1 of 3 A ...
CS/CS/HB 181. 2016. CODING: Words stricken are deletions; words underlined are additions. hb0181-02-c2. Page 1 of 3. F L O R I D A H O U S E.
encitech DB15-SP-K 2101-0181-02 D-SUB pin strip 180 ...
encitech DB15-SP-K 2101-0181-02 D-SUB pin strip 180 ° Number of pins: 15 Solder bucket 1 pc(s) Tray ... 1 piece, 3,59 € ... 2101-0181-02; EAN: 2050005912363.1 piece: 3,59 €5+ pieces: 3,48 €10+ pieces: 3,41 €50+ pieces: 3,23 €
Subway 181, 02/18 Hillside Avenue Suite 1, Jamaica, NY 11432
Rate your experience! $ • Sandwich Shops. Hours: 9AM - 11PM 181, 02/18 Hillside Avenue Suite 1, Jamaica
Subway - 181-02/18 Hillside Avenue, Suite 1 - Foursquare
See 6 photos from 112 visitors to Subway.
April 2022 - Examinations Council of Lesotho
6 days ago — Assessment of Grades 1, 2 and 3 in Lesotho. In August 2014 the Ministry of Education and Training, Lesotho, contracted the Australian ...
Shurflo Straight Fitting Wingnut Swivel - 1/2"-14NPT(F) x 5/8 ...
Shurflo by Pentair Straight Fitting Wingnut Swivel - 1/2"-14NPT(F) x 5/8"Barb - 94-181-02.
SUBWAY at 181-02/18 Hillside Avenue Jamaica NY
Your local Jamaica Subway® Restaurant, located at 181-02/18 Hillside Avenue brings delicious ingredients and mouth-watering flavors in billions of sandwich, ...