| No. | Brand | J | R | F | P | C | d | 1 | T |
| 12.40.2622.401.41.1502 | Standard 5 | - | - | - | - | 15 mm | 40 mm | - | - |
| 12.30.2538.000.11.1503 | Standard 5 | - | - | - | - | 58 mm | 160 mm | - | 75 mm |
| 192.32.2500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.2795.000.11.1502 | Standard 5 | - | - | - | - | 11 mm | 15 mm | - | - |
| 192.25.2800.990.41.1502 | Standard 5 | - | - | - | - | 25 mm | 20 mm | - | - |
| 191.50.5600.990.41.1502 | Standard 5 | - | - | - | - | - | 120 mm | - | - |
| 29 0411 01 | Rollix | - | - | - | - | - | 80 mm | - | - |
| 162.50.2500.891.41.1503 | Standard 5 | - | - | - | - | 212 mm | 440 mm | - | - |
| 91.30.1799.991.21.1502 | Standard 5 | - | - | - | - | 30.162 mm | - | - | - |
| 12.30.1995.001.41.1503 | Standard 5 | - | - | - | - | 16 mm | - | - | - |
| 11.40.2240.001.41.1502 | Standard 5 | - | - | - | - | 15,748 mm | 45,242 mm | - | 19,558 mm |
| 12.50.3839.001.49.1502 | Standard 5 | - | - | - | - | 3 mm | 5 mm | - | - |
| 161.40.2368.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3 0217 | Rollix | - | - | - | - | - | 50 mm | - | - |
| 91.35.2012.990.11.1502 | Standard 5 | - | - | - | - | 7 mm | 6 mm | - | - |
| 62.40.1700.007.19.1503 | Standard 5 | - | - | - | - | 520,000 mm | 530,000 mm | - | - |
| 162.40.2368.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 191.40.4000.990.41.1502 | Standard 5 | - | - | - | - | 5,54 mm | 4,83 mm | - | - |
| 11.30.1734.000.11.1503 | Standard 5 | - | - | - | - | 14 mm | 20 mm | - | - |
| 121.45.5300.990.41.1502 | Standard 5 | - | - | - | - | - | 300 mm | - | - |
| 162.40.2000.890.11.1503 | Standard 5 | - | - | - | - | 8 mm | 10 mm | - | - |
| 161.45.2654.890.11.1503 Standard 5 Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:10.9 mm; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):104; C0 - Static Radial Rating:1560000 N; DD:342.9 mm; db - Cone Backface Backing Diameter:281 mm; Cg - Geometry Factor:0.14; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:128000 lbf; Design Units:METRIC; Aa - Cage-Cone Backface Clearance:6.9 mm; da - Cone Frontface Backing Diameter:245 mm; |
| 162.45.2654.890.11.1503 Standard 5 Slewing Ring Bearings | Calculation factor (Y0):0,94; Weight:0,264 Kg; r2 min.:1,2 mm; B:20,638 mm; D:62 mm; Calculation factor (e):0,35; a:13,2 mm; db min:35,5 mm; T:19,05 mm; C:14,288 mm; rb max.:1,2 mm; d:30,213 mm; Width (mm):19,05; (Oil) Lubrication Speed:8600 r/min; da min.:37,5 mm; Basic static load rating (C0):50,7 kN; (Grease) Lubrication Speed:6400 r/min; Size (mm):30.213x62x19.05; Basic dynamic load rating (C):44,6 kN; |
| 12.40.2622.400.11.1502 Standard 5 Slewing Ring Bearings | d:38,1 mm; Basic dynamic load rating (C):73 kN; Weight:0,492 Kg; D:76,2 mm; (Grease) Lubrication Speed:5100 r/min; Basic static load rating (C0):90,5 kN; Width (mm):23,812; Bore Diameter (mm):38,1; Outer Diameter (mm):76,2; T:23,812 mm; Size (mm):38.1x76.2x23.812; Bearing number:2777/2720; B:25,654 mm; C:19,05 mm; |
| 161.45.2240.890.11.1503 Standard 5 Slewing Ring Bearings | L3:121 mm; Basic static load rating (C0):48,3 kN; A:70 mm; d:76,2 mm; L1:140 mm; H2:111 mm; N1:32 mm; Bearing number:UCT215-48E; A2:48 mm; A1:27 mm; H1:150,8 mm; S:33,3 mm; H:167 mm; L:232 mm; Bore Diameter (mm):76,2; Basic dynamic load rating (C):67,4 kN; B:77,8 mm; N2:70 mm; N:41 mm; Weight:7,3 Kg; |
| 6 04 Rollix Slewing Ring Bearings | Size (mm):70x150x75.5; W:6 mm; DSP:150 mm; C2:41 mm; m:3,81 kg / Weight; Relubricatable:Yes; Cr:111000 N / Dynamic l; d:70 mm; Manufacturer Name:SCHAEFFLER GROUP; Minimum Buy Quantity:N/A; C0r:68000 N / Static loa; Weight / LBS:9.64; B1:75,5 mm; Snap Ring:No; Inch - Metric:Metric; Manufacturer Item Number:GNE70KRRB; Weight / Kilogram:5.149; Bore Diameter (mm):70; Inner Race Profile:Wide Inner Ring; |
| 12.30.1995.000.11.1503 Standard 5 Slewing Ring Bearings | d1:176 mm; D1:142 mm; B:37,5 mm; Bore Diameter (mm):110; Basic static load rating (C0):1695 kN; H:48 mm; Basic dynamic load rating (C):598 kN; Weight:5,6 Kg; Size (mm):110x190x48; (Grease) Lubrication Speed:2448 r/min; Outer Diameter (mm):190; D:190 mm; Width (mm):48; Bearing number:29322 M; E:23 mm; d:110 mm; |
| 191.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings | Contact Angle:25 º; Cage Type:CR - Phenolic Outer; Ce - Dynamic Radial Rating1:58300 N; d:120 mm; Precision Class:ISO P4S (ABEC 7/9); Limiting Speed (Oil):16600 rpm; C0 - Static Radial Rating:55500 N; Bearing Width:22 mm; r - Outer Ring To Clear Radius3:1.0 mm; Full Timken Part Number:3MMC9324WICRDUH; D:165 mm; da - Inner Ring Backing Diameter:130.400 mm; Ball Type:Ceramic; Bearing Weight:1.240 Kg; |
| 191.50.4500.990.41.1502 Standard 5 Slewing Ring Bearings | ID Chamfer Angle (B deg.):45; Housing Bore Dia. (Dh):50 +0.025 / +0; Wall Thickness (S3):2.505; Shaft Dia., Nominal (d):45.0000; Outer Diameter (mm):50; Material:Steel shell with PTF; Bearing Type:straight; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Length, Nominal (B):30.000; Bearing number:AST40 4530; Shaft Size (ds) - 45 -0.025 / -0.050:45 0.025 / 0.050; Average Clearance (Cd):0.0850; |
| 161.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings | Bearing number:NUP 305; Bore Diameter (mm):25; B:17 mm; Basic static load rating (C0):25,2 kN; (Grease) Lubrication Speed:9500 r/min; Outer Diameter (mm):62; d:25 mm; Weight:0.238 Kg; Fw:35 mm; Size (mm):25x62x17; Basic dynamic load rating (C):29,2 kN; Width (mm):17; D:62 mm; r1 min.:1.1 mm; r min.:1.1 mm; |
| 91.50.2446.990.41.1502 Standard 5 Slewing Ring Bearings | C:20,6 mm; d:20 mm; Bore Diameter (mm):20; D:47 mm; Outer Diameter (mm):47; Basic static load rating (C0):12 kN; Basic dynamic load rating (C):18,6 kN; a:22 mm; B1:20,6 mm; Weight:0,16 Kg; (Grease) Lubrication Speed:9000 r/min; Bearing number:3204 ZZ; Width (mm):20,6; Size (mm):20x47x20.6; |
| 62.40.1700.007.19.1503 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):760,000; Bore Diameter (mm):530,000; d:530,000 mm; D:760,000 mm; Size (mm):530x760x520; Bearing number:4R10601; C:520,000 mm; B:520,000 mm; Width (mm):520,000; |
| 161.36.2000.891.41.1503 Standard 5 Slewing Ring Bearings | r1 min.:1 mm; da min.:198 mm; Bearing number:180KBE31+L; (Grease) Lubrication Speed:900 r/min; Outer Diameter (mm):300; T:96 mm; d:180 mm; Calculation factor (Y2):2,6; Weight:24,8 Kg; Size (mm):180x300x96; Basic static load rating (C0):1210 kN; C:85 mm; D:300 mm; Basic dynamic load rating (C):725 kN; Calculation factor (Y0):1,7; Width (mm):96; rb max.:1 mm; Db min.:265 mm; ra max.:2,5 mm; Calculation factor (e):0,39; |
| 11.30.2031.601.41.1503 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):447,675; B:85,725 mm; Bearing number:E-HM259048/HM259010; D:447,675 mm; T:85,725 mm; Width (mm):85,725; Size (mm):317.5x447.675x85.725; Bore Diameter (mm):317,5; C:68,262 mm; d:317,5 mm; |
| 62.50.2240.001.49.1504 Standard 5 Slewing Ring Bearings | Li:762 mm; Bearing number:ELA 20 0844; Z:117 mm; D:950,1 mm; Outer Diameter (mm):950,1; d0:936 mm; La:885 mm; ni:18 mm; Bore Diameter (mm):734; da:842,5 mm; Di:845,5 mm; d:734 mm; m:8 mm; DaZT:847 mm; di:734 mm; na:18 mm; Da:950,1 mm; diZT:736 mm; |
| 12.40.2950.001.41.1502 Standard 5 Slewing Ring Bearings | Angle (α):15 °; Size (mm):190x260x33; Width (mm):33; Outer Diameter (mm):260; B1:33 mm; Bore Diameter (mm):190; d:190 mm; C:33 mm; D:260 mm; Bearing number:71938 C; |
| 92.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | D1:0,719 inch; Category:Thrust Ball Bearings; Outer Diameter (mm):34,14; Outside Diameter:1.344 Inch | 34.138; Weight / Kilogram:0.08; Precision Class:ABEC 1 | ISO P0; Ca:4100 lbf / Dynamic l; Bore Diameter (mm):17,463; Inventory:0.0; Inch - Metric:Inch; m:0,067 kg / Weight; Noun:Bearing; Bearing number:B4; d:17,463 mm; Harmonized Tariff Code:8482.10.50.08; D:34,14 mm; C0a:6700 lbf / Static lo; Product Group:B00308; |
1 0342 Rollix Slewing Ring Bearings Video
Central Brass 0342-1/2 Stand Pipe, Chrome
The standpipe has a 3/4-inch female brass nut for connection to the urinal spud. The flange is chrome plated brass. The standpipe is 3/4-inch 19-gage chrome ...
Stand Pipe, NPT, Polished Chrome, Connection Size: 1/2
Central Brass #0342-1/2 Specifications · Finish: Polished Chrome · Overall Height: 6.44" · Weight: 0.5 · Overall Width: 2.56" · Style: Commercial · Handle Included: ...Overall Height: 6.44"Weight: 0.5$14.04 · In stock
Central Brass 0342-1/2 - Southern Pipe & Supply
Central Brass 0342-1/2 1/2 inch NPT t 6-7/16 inch L Brass Stand Pipe.
Central Brass 0342-1/2 Polished Chrome Stand Pipe ...
Model:0342-1/2 ; Height. 6.4375 in. ; Water Connection. 1/2" ; Width. 2.5625 in. ; Material. Brass ; Approved for Commercial Use. Yes.Water Connection: 1/2"Country Of Origin: Taiwan$13.46 · Out of stock
Central Brass 0342-1/2 Standpipe With Nut & Flange - Chrome
The standpipe has a 3/4 inch female brass nut for connection to the urinal spud. The flange is chrome plated brass. The standpipe is 3/4 inch 19 gage chrome ...
Central Brass 0342-1/2 Accessory-Stand Pipe 1/2" NPT Male ...
We now offer FedEx One Rate $19.99 shipping* for Canadian orders! Canadian orders of $1000+ qualify for Free Shipping* - must use coupon code OHCANADA ...
Central Brass Stand Pipe in Polished Chrome - 0342-1/2
Stand Pipe in Polished Chrome (0342-1/2) at Ferguson. Nobody expects more from us than we do. ®
Central Brass 0342-1/2 | Texas Plumbing Supply
Central Brass 0342-1/2 Stand Pipe, 3/8-18 MNPT, Polished Chrome, Import ... The 1/2-in male tapered pipe adaptor for connection to the urinal valve is ...
Central Brass 0342-1/2 | APR Supply
Central Brass 0342-1/2 Stand Pipe, 3/8-18 MNPT, Polished Chrome, Import ; Mfg. Name: Pioneer Industries ; MPN: 0342-1/2 ; Brand: Central Brass ; UPC: 763439015037 ...
Central Brass 0342-1/2 Stand Pipe |
Save on the Central Brass 0342-1/2 from Build.com. Low Prices + Fast & Free Shipping on Most Orders. Find reviews, expert advice, manuals, specs & more.